PowerWalker VFI 1000 RMG PF1
En beskrivelse av UPS-typen som brukes for å sikre uavbrutt strømforsyning til alle maskiner i serverrommet.
Kort beskrivelse
Fra manualen:
“The PowerWalker VFI 1000-3000 RMG PF1 is a professional UPS for commercial applications featuring Unity Power Factor (PF=1.0) and a very strong charger with adjustable current. Allows connecting loads with half-wave imbalance (i.e., laser printers and ultrasound systems) and provides generator support.
Multiple accessories, including battery packs and communication cards, enhance the functionality of the UPS and allow a greater backup time. The system can be monitored locally via an LCD panel or remotely via the PowerWalker ViewPower software. With its slim design it only requires 2U of valuable space of your rack system. The UPS can be installed in a 19” rack system or used as a tower.”
Spesifikasjoner
| General Features |
|
| Type |
Online Single Phase (VFI) |
| Phases (IN-OUT) |
1-1 |
| Form Factor |
Rack, Tower |
| Rack Units [U] |
2U |
| Power Capacity |
1000VA / 1000W |
| Output Power Factor |
1.00 |
| Input |
|
| Input Voltage Range |
|
|
Line Low Transfer: 110-160VAC ± 5% depending on load level |
|
Line Low Comeback: 125-175VAC ± 5% depending on load level |
|
Line High Transfer: 300VAC ± 5% |
|
Line High Comeback: 290VAC ± 5VAC |
| Max THDi |
≤ 5% @ 205-245VAC; THDu ≤ 1.6% @ input and full linear load condition |
| Frequency Range |
40Hz – 70Hz |
| Frequency (Synchronized Range) |
47Hz – 53Hz or 57Hz – 63Hz |
| Output |
|
| Waveform |
Pure Sine Wave |
| Nominal Output Voltage |
200/208/220/230/240 VAC |
| THDv |
≤2% @ 100% linear load, ≤4% @ 100% non-linear load |
| Voltage Regulation (Battery Mode) |
±1% |
| Frequency (Battery Mode) |
±0.1Hz |
| Input & Output Connectors |
|
| Input Connector |
C14 |
| Output Type |
IEC |
| IEC C13 |
8 |
| Technical Details |
|
| LINE Mode Efficiency [%] (Full Load) |
89.0 |
| Transfer Time (AC / Line Mode or Battery Mode to ECO Mode) [ms] |
10ms |
| Transfer Time (AC / Line Mode to Battery Mode) [ms] |
0ms |
| Transfer Time (ECO Mode to AC / Line Mode or Battery Mode) [ms] |
10ms |
| Transfer Time (Line Mode or Battery Mode to Bypass Mode) [ms] |
4ms |
| Load Crest Ratio |
3:1 |
| Data Line Protection |
RJ-11 Port, RJ-45 Port (100mbit) |
| Additional Features |
|
|
ECO Mode Available |
|
CVCF Mode Available |
|
Potential Equalization |
|
Screw |
|
Hot-Swappable Batteries |
|
LCD Display |
|
Unity Power Factor 1.0 |
|
Battery Pack Available |
|
EPO – Emergency Power Off |
|
Programmable Segment Available |
|
HID – Human Interface Device |
|
AVR – Automatic Voltage Regulator |
| IEC 62040-3 classification |
VFI-SS-111 |
| Batteries and Autonomy |
|
| Batteries |
3x 12.0V/7.0Ah |
| DC Voltage |
3x 12.0V |
| Recharge Time |
3h to 90% |
| Full Load Backup Time [min] |
4.4 |
| Half Load Backup Time [min] |
12.9 |
| Charger |
1-12A [2A] |
| External Battery Pack |
Yes |
| Communication |
|
| Communication |
USB Type B – for Monitoring Software, RS-232, Management Card Slot |
| Software |
ViewPower |
| Environment |
|
| Noise Level |
< 50dB |
| Fan Logic |
Always on, Automatic Speed Control |
| Temperature |
0°C – 40°C |
| Humidity |
20% – 95% RH (non-condensing) |
| IP |
IP 20 |
| Logistics |
|
| Package Content |
Rack Ears, Input Power Cable, Manual, 2x IEC Cable, USB Cable, Tower Holder, UPS |
| Manual Languages |
DE, RU, PL, EN |
| EAN |
4260074979954 |
| Product Dimensions (DxWxH) [mm] |
410 x 438 x 88 mm |
| Product Weight [kg] |
14.1 |
| Package Dimensions (DxWxH) [mm] |
560 x 500 x 180 mm |
| Package Weight [kg] |
17.6 |
| Pcs. per Outer Carton |
1 |
| Pcs. per Layer |
2 |
| Pcs. per Pallet |
20 |
| Pcs. per Pallet [Oversized] |
18 |
Kilder
PowerWalker VFI 1000 RMG PF1 - Spec Sheet, sist lest 15.08.23
PowerWalker VFI 1000 RMG PF1 Product Page, sist lest 15.08.23